Module:Convert/text
Documentation for this module may be created at Module:Convert/text/doc
--[[ Text used by Module:Convert.
This is a separate module to simplify translation for use on another wiki.
Module:Convert responds to text parameters, and can display text.
Nearly all that text is defined in:
* Module:Convert/data (unit definitions)
* Module:Convert/text (parameter and message definitions)
In addition to the parameters defined here, Module:Convert accepts built-in
parameters shown in the following examples:
debug=yes Can be used with sortable=on.
sigfig=3 To set number of output significant figures.
]]
local translation_table = {
-- Tables to translate digits from/to en.
-- The to_en table can be calculated from the from_en table, but that
-- overhead seems excessive for each convert.
-- Will not try to put many languages here; this is mainly for testing.
test = {
-- For Johnuniq's test system; will remove later.
from_en = {
['0'] = '<0>',
['1'] = '<1>',
['2'] = '<2>',
['3'] = '<3>',
['4'] = '<4>',
['5'] = '<5>',
['6'] = '<6>',
['7'] = '<7>',
['8'] = '<8>',
['9'] = '<9>',
},
to_en = {
['<0>'] = '0',
['<1>'] = '1',
['<2>'] = '2',
['<3>'] = '3',
['<4>'] = '4',
['<5>'] = '5',
['<6>'] = '6',
['<7>'] = '7',
['<8>'] = '8',
['<9>'] = '9',
}
},
as = {
-- Bengali (bn.wikipedia.org).
group = 2, -- group numbers 3 digits, then 2 digits
plural_suffix = '', -- disable plural unit names
from_en = {
['0'] = '০',
['1'] = '১',
['2'] = '২',
['3'] = '৩',
['4'] = '৪',
['5'] = '৫',
['6'] = '৬',
['7'] = '৭',
['8'] = '৮',
['9'] = '৯',
},
to_en = {
['০'] = '0',
['১'] = '1',
['২'] = '2',
['৩'] = '3',
['৪'] = '4',
['৫'] = '5',
['৬'] = '6',
['৭'] = '7',
['৮'] = '8',
['৯'] = '9',
},
}
}
-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.
local SIprefixes = {
-- The prefix field is what the prefix should be, if different from the prefix used.
['Y'] = { exponent = 24, name = 'yotta', },
['Z'] = { exponent = 21, name = 'zetta', },
['E'] = { exponent = 18, name = 'exa' , },
['P'] = { exponent = 15, name = 'peta' , },
['T'] = { exponent = 12, name = 'tera' , },
['G'] = { exponent = 9, name = 'giga' , },
['M'] = { exponent = 6, name = 'mega' , },
['k'] = { exponent = 3, name = 'kilo' , },
['h'] = { exponent = 2, name = 'hecto', },
['da']= { exponent = 1, name = 'deca' , name_us = 'deka' },
['d'] = { exponent = -1, name = 'deci' , },
['c'] = { exponent = -2, name = 'centi', },
['m'] = { exponent = -3, name = 'milli', },
['μ'] = { exponent = -6, name = 'micro', prefix = 'µ' }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['µ'] = { exponent = -6, name = 'micro', }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['u'] = { exponent = -6, name = 'micro', prefix = 'µ' }, -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = 'nano' , },
['p'] = { exponent =-12, name = 'pico' , },
['f'] = { exponent =-15, name = 'femto', },
['a'] = { exponent =-18, name = 'atto' , },
['z'] = { exponent =-21, name = 'zepto', },
['y'] = { exponent =-24, name = 'yocto', },
}
-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = {
{ "US", link = "United States customary units" },
{ "U.S.", link = "United States customary units" },
{ "imperial", link = "Imperial unit" },
{ "imp", link = "Imperial unit" },
}
-- Names when using engineering notation (a prefix of "eN" where N is a number).
-- key = { "name", link = "article title", exponent = key }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
["3"] = { "thousand", exponent = 3 },
["6"] = { "million", exponent = 6 },
["9"] = { "billion", link = "1000000000 (number)", exponent = 9 },
["12"] = { "trillion", link = "1000000000000 (number)", exponent = 12 },
["15"] = { "quadrillion", link = "1000000000000000 (number)", exponent = 15 },
}
-- When appropriate, the following categories can be included in the output.
local all_categories = {
general = "[[Category:Convert error]]",
mismatch = "[[Category:Convert dimension mismatch]]",
option = "[[Category:Convert invalid option]]",
unknown = "[[Category:Convert unknown unit]]",
}
-- Following puts wanted style around each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '<code style="background:transparent;">', ['}'] = '</code>' }
-- All messages that may be displayed if a problem occurs.
local all_messages = {
-- One of the following prefixes is inserted before each message.
cvt_prefix_error = '<span style="color:black; background-color:orange;">[[Module talk:Convert|Conversion error]]:',
cvt_prefix_warning = '<span style="color:black; background-color:peachpuff;">[[Module talk:Convert|Conversion warning]]:',
-- Each of following messages is a table:
-- { [1] = 'error text',
-- [2] = 'category key',
-- regex = gsub_regex,
-- replace = gsub_table,
-- warning = true, -- omitted for an error message; selects cvt_prefix_error or cvt_prefix_warning
-- }
cvt_bad_default = { 'Unit "%s" has an invalid default', 'unknown' },
cvt_bad_num = { 'Value "%s" must be a number', 'general' },
cvt_bad_num2 = { 'Second value "%s" must be a number', 'general' },
cvt_bad_prec = { 'Parameter precision "%s" must be an integer', 'general' },
cvt_bad_sigfig = { 'Parameter sigfig "%s" must be a positive integer', 'general' },
cvt_bad_unit = { 'Unit "%s" is invalid here', 'unknown' },
cvt_big_prec = { 'Precision "%s" is too large', 'general' },
cvt_bug_convert = { 'Bug: Cannot convert between specified units', 'general' },
cvt_empty_option = { 'Ignored empty option "%s"', 'option', warning = true },
cvt_invalid_num = { 'Number is too large or too small', 'general' },
cvt_mismatch = { 'Cannot convert "%s" to "%s"', 'mismatch' },
cvt_no_default = { 'Unit "%s" has no default output unit', 'unknown' },
cvt_no_num = { 'Need value', 'general' },
cvt_no_num2 = { 'Need second value', 'general' },
cvt_no_unit = { 'Need name of unit', 'unknown' },
cvt_unknown_option = { 'Ignored invalid option "%s"', 'option', warning = true },
cvt_should_be = { '%s', 'general', regex = unitcode_regex, replace = unitcode_replace },
cvt_unknown = { 'Unit "%s" is not known', 'unknown' },
}
-- Text to join input value/unit with output value/unit.
local disp_joins = {
["or"] = { " or " , "" },
["sqbr-sp"] = { " [" , "]" },
["sqbr-nbsp"] = { " [" , "]" },
["comma"] = { ", " , "" },
["slash-sp"] = { " / " , "" },
["slash-nbsp"] = { " / ", "" },
["slash-nosp"] = { "/" , "" },
["b"] = { " (" , ")" },
["br"] = { "<br/>" , "" },
}
-- Text to separate values in a range.
local range_types = {
["by"] = " পূৰণ ",
["-"] = "–",
["to about"] = " ৰ পৰা প্ৰায় ",
["and"] = { ["off"] = " আৰু ", ["on"] = " আৰু ", exception = true },
["or"] = { ["off"] = " বা " , ["on"] = " বা " , exception = true },
["to"] = { ["off"] = " ৰ পৰা " , ["on"] = " ৰ পৰা " , exception = true },
["xx"] = " × ",
["to(-)"] = { ["off"] = " ৰ পৰা ", ["on"] = "–" },
["+/-"] = { ["off"] = " ± ", ["on"] = " ± ", ["adj"] = " ± " },
["x"] = { ["off"] = " পূৰণ ", ["on"] = " × ", is_range_x = true },
}
local range_aliases = {
["and(-)"] = "and",
["&"] = "and",
["–"] = "-",
["–"] = "-",
["to-"] = "to(-)",
["×"] = "x",
["±"] = "+/-",
}
-- Valid option names.
local local_option_name = {
-- ["en name used in this module"] = "local text for option name"
["abbr"] = "abbr",
["adj"] = "adj",
["disp"] = "disp",
["comma"] = "comma",
["lang"] = "lang",
["lk"] = "lk",
["sing"] = "sing",
["sortable"] = "sortable",
["sp"] = "sp",
}
-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At en.wiki, "abbr" includes:
-- ["comma"] = "opt_nocomma"
-- As a result, if the template uses abbr=comma, this script sets:
-- parms["opt_nocomma"] = true
-- parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
local en_option_value = {
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
["comma"] = "opt_nocomma", -- no numsep in input or output numbers
["in"] = "in", -- use symbol for LHS unit
["mos"] = "mos", -- in a range, repeat the input unit (no longer used)
["none"] = "off", -- old name for "off"
["off"] = "off", -- use name for all units
["on"] = "on", -- use symbol for all units
["out"] = "out", -- use symbol for RHS unit (default)
["values"] = "opt_values", -- show only input and output numbers, not units
["~"] = "opt_also_symbol", -- show input unit symbol as well as name
},
["adj"] = {
["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)
["flip"] = "opt_flip", -- reverse order of input/output
["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name
["mid"] = "opt_adj_mid", -- adj=on with user-specified text before input unit
["nocomma"] = "opt_nocomma", -- no numsep in input or output numbers
["off"] = "", -- ignored (off is the default)
["on"] = "opt_adjectival", -- unit name is singular and hyphenated
["pre"] = "opt_one_preunit", -- user-specified text before input unit
["ri1"] = "ri1", -- round input with precision = 1
["ri2"] = "ri2", -- round input with precision = 2
["ri3"] = "ri3", -- round input with precision = 3
},
["disp"] = {
["/"] = "slash", -- join: '/'
["2"] = "opt_output_only",
["5"] = "opt_round5", -- round output value to nearest 5
["b"] = "b", -- join: '(...)'
["br"] = "br", -- join: '<br/>'
["comma"] = "comma", -- join: ','
["flip"] = "opt_flip", -- reverse order of input/output
["flip5"] = "opt_flip:opt_round5", -- disp=flip + disp=5
["nocomma"] = "opt_nocomma", -- no numsep in input or output numbers
["number"] = "opt_output_number_only",
["or"] = "or", -- join: 'or'
["out"] = "opt_output_only",
["output number only"] = "opt_output_number_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units
["s"] = "slash", -- join: '/'
["slash"] = "slash", -- join: '/'
["sqbr"] = "sqbr", -- join: '[...]'
["table"] = "opt_table", -- output suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen", -- output suitable for a table cell with align="center"
["u2"] = "opt_output_unit_only",
["unit"] = "opt_input_unit_only",
["unit2"] = "opt_output_unit_only",
["x"] = "x", -- join: 'by...×'
},
["comma"] = {
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits
["gaps5"] = "opt_gaps:opt_comma5", -- opt_gaps + opt_comma5
},
["lang"] = {
["en"] = "opt_lang_en", -- use en digits for output, regardless of local language
},
["lk"] = {
["in"] = "in", -- link LHS unit name or symbol
["off"] = "", -- ignored (off is the default)
["on"] = "on", -- link all unit names or symbols
["out"] = "out", -- link RHS unit name or symbol
},
["sortable"] = {
["off"] = "", -- ignored (off is the default)
["on"] = "opt_sortable", -- output numeric hidden sort field for use in a sortable table
},
["sp"] = {
["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre")
},
}
return {
SIprefixes = SIprefixes,
all_categories = all_categories,
all_messages = all_messages,
customary_units = customary_units,
disp_joins = disp_joins,
en_option_value = en_option_value,
eng_scales = eng_scales,
local_option_name = local_option_name,
range_aliases = range_aliases,
range_types = range_types,
translation_table = translation_table,
}